FRACTIONED VACUUM AUTOCLAVE - Egle - CBM - Used Laboratory Equipment and New Lab Instrument Supplies, UK

FRACTIONED VACUUM AUTOCLAVE - Egle - CBM

Small steam-powered fractioned vacuum autoclave sterilizing units are widely used for the sterilization of medical devices and material that comes in contact with blood and other bodily fluids.
Fractioned Vacuum Autoclave have a wide field of use. Dentists, surgeons, veterinary doctors are some of the main users of small sterilising units. Nowadays steam sterilizing units are also used by non-medical professionals, like tattoo artists, hairdressers and beauticians. Each field of application has its own needs. C.B.M. has developed Fractioned Vacuum Autoclave steam sterilizers for years in order to meet the various needs of the each user. C.B.M. moreover means respect for European regulations. Our firm was in fact involved in drawing up European regulations on small steam sterilizers (CEN TC102 Wg5).

Pre-vacuum is no longer so effective when loads to be sterilized are very porous or provided with very deep hollows, such as endoscopes, turbines and stricks.The best technique to remove air from loads is a proper combination of mechanical removal and steam injection. A fractionated vacuum cycle represents the soundest method of steam sterilization, The air closed in the load is compressed and heated during the steam injection phases. Subsequently the pump shall collect the air which has "flown away" from the load by means of heating. Thanks to the effectiveness of the fractionated vacuum method all the tests required by the latest European standards for small steam sterilizers, such as the "Helix" test and the "Bowie & Dick" one are successfully overcome.

Fractioned Vacuum Autoclave Electronic control card

• Electronic Microprocessor control card
• Digital Pressure and Temperature display
• Big Back lighted LCD display
• Software designed to guide the user during operation

Fractioned Vacuum Autoclave Chamber

• Chamber pressed forged entirely out of AISI 304 stainless steel
• Structure mae entirely out of AISI 304 stainless steel
• Steam Generator

Fractioned Vacuum Autoclave Cycles Table

Fractioned Vacuum Autoclave Specifications

• Height (mm) approx: 430
• Width (mm) approx: 470
• Length (mm) approx: 570
• Weight (KG): 63
• Material: Stainless steel AISI304
• Control: Completely with microprocessor
• Max. Absorbed Power (W): 1590
• Feeding frequency (Hz): 50
• Feeding Voltage (V): 230
• Feeding Current: 8
• Number of Cycles: 4+2 test
• Air Filtration: Mass produced
• Sterilising Temperature: 121 - 134 degrees C
• Tank: 2
• Display: With liquid crystals 4 x 16 characters
• Messages Language Selection: Deutsche, francais, Espanol, Italian and English
• Users Instructions: Deutsche, francais, Espanol, Italian and Eenglish
• Dater: Mass produced
• Intelligent Autodiagnostic: Mass produced
• Serial Port: Mass produced
• Printer Arrangement: Mass produced
• Cycle Counter: Mass produced
• Open Door Dimensions (mm): 820
• Min. Embedding Dimensions (mm): 560 x 580 x 480
• Chamber Width (mm): 240
• Chamber Depth (mm): 350
• Chamber Volume (Litres): 15
• Safety Valve Pressure: 2.5 Bar
• Loading Tank Volume (Litres): 3.6
• Unloading Tank Volume (Litres): 3.6
• Recommended Water Type: Demineralised
• Max. Water Volume Used Per Cycle (Litres): 0.9
• Max. Operating Altitude: 2000 metres
• Operating Environment Temperature: 5 - 40 degrees C
• Max. Relative Humidity in the Operating Environment: 80% - 31 degrees C
• Packing Gross Weight (KG): 60

The CBM range of autoclaves are manufactured to ISO 9001 standard and are CE approved. All equipment is Brand New and comes complete with operating manual and a 1 year guarantee.