FRACTIONED VACUUM AUTOCLAVE - Egle 20 - CBM - Used Laboratory Equipment and New Lab Instrument Supplies, UK

FRACTIONED VACUUM AUTOCLAVE - Egle 20 - CBM

Small steam-powered fractioned vacuum autoclave sterilizing units are widely used for the sterilization of medical devices and material that comes in contact with blood and other bodily fluids.
Autoclaves have a wide field of use. Dentists, surgeons, veterinary doctors are some of the main users of small sterilising units. Nowadays steam sterilizing units are also used by non-medical professionals, like tattoo artists, hairdressers and beauticians. Each field of application has its own needs. C.B.M. has developed steam-powered fractioned vacuum autoclave steam sterilizers for years in order to meet the various needs of the each user. C.B.M. moreover means respect for European regulations. Our firm was in fact involved in drawing up European regulations on small steam sterilizers (CEN TC102 Wg5).

Pre-vacuum is no longer so effective when loads to be sterilized are very porous or provided with very deep hollows, such as endoscopes, turbines and stricks.The best technique to remove air from loads is a proper combination of mechanical removal and steam injection. A fractionated vacuum cycle represents the soundest method of steam sterilization, The air closed in the load is compressed and heated during the steam injection phases. Subsequently the pump shall collect the air which has "flown away" from the load by means of heating. Thanks to the effectiveness of the fractionated vacuum method all the tests required by the latest European standards for small steam sterilizers, such as the "Helix" test and the "Bowie & Dick" one are successfully overcome.

Steam-Powered Fractioned Vacuum Autoclave Electronic control card

• Electronic Microprocessor control card
• Digital Pressure and Temperature display
• Big Back lighted LCD display
• Software designed to guide the user during operation

Fractioned Vacuum Autoclave Chamber

• Chamber pressed forged entirely out of AISI 304 stainless steel
• Structure mae entirely out of AISI 304 stainless steel
• Steam Generator

Fractioned Vacuum Autoclave Cycles Table

Fractioned Vacuum Autoclave Specification

HEIGHT (mm) approx. 430
WIDTH (mm) approx. 470
LENGHT (mm) approx. 620
WEIGHT (Kg) - 67
MATERIAL - stainless steel AISI304
CONTROL - Completely with microprocessor
MAX. ABSORBED POWER (W) 1590
FEEDING FREQUENCY (Hz) 50
FEEDING VOLTAGE (V) 230
FEEDING CURRENT - 8
NUMBER OF CYCLES - 4+2 test
AIR FILTRATION- Mass produced
STERILIZING TEMPERATURE - 121C-134C
TANK - 2
DISPLAY - With liquid crystals 4x16 characters

MESSAGES LANGUAGE SELECTION

• Italian
• English
• Deutsche
• Francais
• Espanol

USER'S INSTRUCTIONS

• Italian
• English
• Deutsche
• Francais
• Espanol

DATER - Mass produced
INTELLIGENT AUTODIAGNOSTIC - Mass produced
SERIAL PORT - Mass produced
PRINTER ARRANGEMENT - Mass produced
CYCLE COUNTER - Mass produced
OPEN DOOR DIMENSIONS (mm) - 870
MAX. WEIGHT (Kg) - 67
MAX. WEIGHT DISTRIBUTION (Total for 4 feet) ( N/m ) - 131000
MIN. EMBEDDING DIMENSIONS (mm) - 610x580x480
CHAMBER WIDTH (mm) - 240
CHAMBER DEPTH (mm) - 400
CHAMBER VOLUME (l) - 18
SAFETY VALVE PRESSURE 2.5 Bar
LOADING TANK VOLUME (l) - 3.6
UNLOADING TANK VOLUME (l) - 3.6
RECOMMENDED WATER TYPE DEMINERALIZED
MAX. WATER VOLUME USED PER CYCLE (l) 0.9
MAX. OPERATING ALTITUDE 2000 m
OPERATING ENVIRONMENT TEMPERATURE 5C/40C
MAX. RELATIVE HUMIDITY IN THE OPERATING ENVIRONMENT 80%-31C
PACKING GROSS WEIGHT (Kg) 65

The CBM range of autoclaves are manufactured to ISO 9001 standard and are CE approved. All equipment is Brand New and comes complete with operating manual and a 1 year guarantee.