Horizontal and vertical three zone tube furnaces - Used Laboratory Equipment and New Lab Instrument Supplies, UK

ontal and vertical three zone tube furnaces

• Maximum operating temperature 1200C
• Tube diameters range from 38 - 100mm
• Heated lengths from 400 - 900mm
• These models utilise three resistance wire heating elements wound around the integral ceramic worktube
• Three control systems balance the power to the heating elements to ensure excellent thermal uniformity
• The thermocouples are located in a protected position between the outside of the worktube and heating element, allowing the full worktube diameter to be used
• Normally built on the horizontal base pictured left, this furnace range can optionally be mounted vertically with a separate control box
• Applications in Instrumentation include testing of temperature sensors such as thermocouples and PT100's, which require enhanced axial thermal uniformity
• Applications in Materials Research include testing of novel materials under strict temperature conditions
• Applications in the Electronics Industry include testing electronic components and semiconductor materials
• This range can be supplied with three equal heated lengths, for special applications

1200C Horizontal Three Zone tube (GHC)

• Maximum operating temperature of 1200C
• Tube diameters up to 170mm
• Six heated lengths from 450 - 1200mm
• Heating is provided by resistance wire heating elements, semi-embedded in rigidised vacuum formed low thermal mass insulation modules, together with an optional, separate ceramic worktube to ensure excellent thermal uniformity
• Three control systems balance the power to the heating elements to ensure excellent thermal uniformity
• Rapid heat up to operating temperature
• Removable tube adapters allow rapid changes for different size worktubes
• Built on the horizontal base pictured left,with a separate control box
• Applications in instrumentation include testing and calibration of temperature sensors such as thermocouples and PT100's, which require enhanced thermal uniformity
• Applications in materials research include testing of novel materials under strict temperature conditions
• Applications in the electronics industry include testing electronic components and semiconductor materials
• Selected models in this range can be supplied with three equal heated lengths, for special applications

1200C Vertical Three Zone tube (GVC)

• Maximum operating temperature of 1200C
• Tube diameters up to 170mm
• Six heated lengths from 450 - 1200mm
• Heating is provided by resistance wire heating elements, semi-embedded in rigidised vacuum formed low thermal mass insulation modules, together with an optional, separate ceramic worktube to ensure excellent thermal uniformity
• Three control systems balance the power to the heating elements to ensure excellent thermal uniformity
• Rapid heat up to operating temperature
• Removable tube adapters allow rapid changes for different size worktubes
• Supplied with versatile stand kit to allow vertical, wall mounted or horizontal use, with a separate control box
• Applications in Instrumentation include testing and calibration of temperature sensors such as thermocouples and PT100's, which require enhanced thermal uniformity
• Applications in Materials Research include testing of novel materials under strict temperature conditions
• Applications in the Electronics Industry include testing electronic components and semiconductor materials
• Selected models in this range can be supplied with three equal heated lengths, for special applications

1500C & 1600C Three Zone tube (TZF)

• Maximum operating temperatures of 1500C or 1600C
• Accepts worktubes up to 90mm outside diameter
• Heated length of 610mm
• These models utilise three sets of silicon carbide heating elements, arranged symetrically around a separate ceramic worktube
• Three control systems balance the power to the heating elements to ensure excellent thermal uniformity
• Rapid heat up to operating temperature
• Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting a longer length worktube and end seals
• Normally built on the horizontal base pictured left, this furnace range can optionally be mounted vertically with a separate control box
• Applications in Instrumentation include testing of temperature sensors such as thermocouples and PT100's, that require enhanced axial thermal uniformity
• Applications in materials research include testing of novel materials under strict temperature conditions
• Applications in the electronics industry include testing electronic components and semiconductor materials

1700C & 1800C Three Zone tube (TZF)

• Maximum operating temperatures of 1700C & 1800C
• Accepts a worktube of 90mm outside diameter
• Heated length of 600mm
• These models utilise molybdenum disilicide heating elements, arranged vertically around a separate ceramic worktube to ensure excellent thermal uniformity
• Available for horizontal use only
• Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting a longer length worktube and end seals
• Applications in the ceramics industry include disintegration, testing and analysis of cement samples, refractory porosity tests, long term high temperature temperature tests and firing & sintering of ceramic samples
• Applications in the semi conductor industry include annealing silicon, silicon carbide & nitride samples and solid state synthesis
• Applications in materials research include testing of novel materials under strict temperature and varying atmosphere conditions
• Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced axial thermal uniformity