Used Laboratory Equipment

High Purity Sampling System-hps2 - Used Laboratory Equipment and New Lab Instrument Supplies, UK

Call us: 01204 848 430

You are here:

High Purity Sampling System-hps2

PDF  | Print |  E-mail

High Purity Sampling System - hps2 HPS2.gif

 

Contrôle Analytique introduces the new HPS2 High Purity Sampling System. A leading manufacturer of trace gas analyzers since 1995, Contrôle Analytique is always trying to tailor industrial needs that tend towards low concentration measurements. The sampling system capability of not contaminating gases becomes essential at this high level of purity. Using a patent pending system in which no control element intervenes with the outlet, the HPS2 reaches a new level of performance in low level measurement and becomes an essential device in any ultra high purity field of application.

Features
  • Up to 6 sample selections
  • No dead volumes or cross-port leakage
  • Compensated outlet pressure
  • Flows and pressures displayed on LCD
  • No flow control element in contact with the sample directed to the analytical system
  • Intuitive user interface
  • Real time clock
  • Alarm historic
  • Digital I/O, RS232 and RS485 to monitor and control
  • Internet / web enabled
  • CE conform and CSA on demand
Page Up
Targeted Applications
Critical sampling where sample must not be contaminated by the fluid control element such as:
  • Low level moisture monitoring
  • Particle monitoring (smooth stream changeover do not generate surging at particle level)
  • Any sub ppb permanent gases and light hydrocarbon determination
Page Up
Other Applications
  • Argon purification plants
  • Air separation plants
  • Gas management system
  • Chemical plants
  • Steel industries
  • Cryogenic truck loading stations
  • Speciality gas laboratories
  • Process control
Page Up
Specifications
Special Feature
Dimensions

Cart configuration: Contrôle Analytique offers a complete solution proposed in the form of a cart for standalone applications including a GCS-100 combined with a K4000NG, a MSS Manual Sampling System, GP-200 Intelligent Gas Purifier, calibration gases and much more.
High (mm) Deep (mm) Wide (mm)
Standard rack mount 3U 5.25" (133.3) 18" (457.0) 19" (482.6)
Pressure at the inlets At least 20 to 180 PSI
Outlet pressure At least 20 to 170 PSI
Sample flow requirements At least 0.2 to 150 L/min
Gas inlets and outlet 1/8" VCR fittings
Vent outlets 1/8" Swagelok fittings
Gas lines All stainless steel
Restrictors Capillary tubing mechanically protected (to prevent any deformation)
Digital inputs 120/240 VAC (TTL compatible on demand)
Digital outputs TTL or dry relay contact (SPST 1 amp 250 VAC resistive load)
Operating temperature 5 to 40ºC
Supply 115 VAC, 50-60 Hz or 220 VAC, 50-60 Hz
Display Color 5.7" LCD
Keypad 4x4 matrix
Power requirements 40 watts
Option Critical parts can be heated (up to 150ºC)
Custom options Contact Contrôle Analytique's engineering team
 
< Prev   Next >
[ Back ]