|
VC 2 IKAVAC® Vacuum controller
Used to create a controlled partial vacuum in laboratory applications. Typical tasks are the evacuation of desiccators, vacuum apparatus, etc. Solvent recovery rates of up to 99% are possible if rotary evaporators are used.
- Microprocessor-controlled
- Minimum solvent loss
- Considerable reductions in water costs
- Integrated air release valve
- Easy operation
- Space-saving stand-supported instrument
- Automatic setpoint correction
- Clearly organized membrane keyboard
Ident. No.2300000
HKD 06.2 Plunger
Double-walled plunger seat, for heating and cooling, which presses down the kneading material by means of spring-action. This considerably improves heat conduction in the measuring kneader. The central supply opening can be closed with a plunger. The HKD 06.2 plunger is not suitable for vacuum operation.
Ident. No.2936000
LT 6 control Circulation thermostat
Programmable thermostat for sophisticated tempering tasks up to 300 °C.
- Temperature manually adjustable or controllable via PC
- Automatic adaption of control parameters to all temperature control tasks via PID control
- Suitable for technical procedure experiments, e.g. with lab reactors or kneaders
- Direct temperature control in external vessels is possible
- 2 x 1 m Viton hose (Ø = 10 mm, max. temperature 180 °C), included with delivery
- Appliance type circulation thermostat
- Identification according to DIN 12876 FL
- Heat output 2000 W
- Operating temperature min. 60 °C
- Operating temperature max. 300 °C
- Working temperature max. 300 °C
- Working temperature min. (with water cooling) 20 °C
- Working temperature max. (with water cooling) 300 °C
- Temperature display yes
- Connection for ext. temperature sensor PT 100
- Heat control accuracy 0.01 ±K
- Adjustable safety circuit min. 20 °C
- Adjustable safety circuit max. 300 °C
- Pump pressure max. (0 liters discharge flow) 0.5 bar
- Pump pressure max. (0 bar back pressure) 18 l/min
- Width 230 mm
- Depth 365 mm
- Height 405 mm
- Weight 18 kg
- Permissible ambient temperature min. 5 °C
- Permissible ambient temperature max. 40 °C
- Permissible relative moisture 80 %
- Protection class according to DIN EN 60529 IP 21
- RS 232 interface yes
- Analog output yes
- Voltage 230 V
- Frequency 50/60 Hz
Ident. No.3036100
DC 2 DATACONTROL
For PC documentation of analog signals from up to 4 instruments.
Ident. No.8015600
DTM 12 IKATRON® Digital temperature measuring instrument
For measuring temperatures between -200 °C up to +400 °C.
- LED display
- Analog output (1 °C = 1mV)
- Almemo interface for PC connection
- Sensor connection: Almemo
- pH electrode available as accessory
- Other measuring parameters, e.g. conductivity on request
Ident. No.3113200
labworldsoft®
Eases life in the laboratory. With this laboratory software, you can network up to 64 laboratory devices simultaneously via one PC. That makes the automation of your laboratory experiments and processes possible.
Measurements and processes may be run independently from one another. This helps to avoid long waits and you increase your productivity. The communication between PC and laboratory device is performed via the serial interface RS 232 (COM1 or COM2). With the help of plug-in cards and Ethernet RS 232 servers, up to 64 laboratory devices can be used simultaneously via one PC. All laboratory instruments can be controlled independently from each other and the measured values (speed, temperature, torque, pH, etc.) can be documented separately.
Hard- and software requirements:
Pentium 90 with at least 16 MB RAM, and a mouse. VGA display: monochrome with at least 16 levels of grey or color.
Windows 95/98/2000/NT/ME/XP... Networking, monitoring
With labworldsoft® you can network up to 64 laboratory instruments simultaneously via one PC. From sample preparation to synthesis, all steps of research and development in the lab can be automated using labworldsoft®. Controlling
Desired temperature and speed sequences can be precisely controlled by means of freely selectable ramp functions. The ramp functions can be graphically generated, stored, and then loaded again at any time. Recording, evaluating
labworldsoft® enables a fast and easy recording of many physical parameters which are required in the laboratory, such as pH, conductivity, temperature, torque, weight, pump rates etc. Exporting
Data acquired in labworldsoft® can be exported into standard applications. For example it is possible to measure the speed during a test, save the data in a standard format (.txt or ASCII) and analyze in any chart calculation, i.e. Excel. Storing / reproducing measured data
Do your test arrangements repeat themselves? With labworldsoft® all test arrangements can be stored. The stored data is available to reproduce the test, at a mouse click. The reproductability of tests is warranted within the scope of ISO 9000 and within GLP. Documentation
For documentation purposes, all measuring results as well as the measurement
flowcharts can be printed or plotted according to GLP, ISO and QA. For technical support please use our European service hotline at +49-7633-831-0 or send an email to
This email address is being protected from spam bots, you need Javascript enabled to view it
Downloads:
Your free trial version (30 days fully functional) labworldsoft® manual (PDF) Accessories description (PDF) Article: "Measuring, Controlling and Regulating with labworldsoft®",K.-O. Linde (PDF) - Windows 95 yes
- Windows 98 yes
- Windows ME yes
- Windows NT4 yes
- Windows 2000 yes
- Windows XP yes
Ident. No.2970000
|
RSS Feed