High Performance Laboratory Kneader Accessories - Used Laboratory Equipment and New Lab Instrument Supplies, UK

IKA - VC 2 IKAVAC® Vacuum controller

Used to create a controlled partial vacuum in laboratory applications. Typical tasks are the evacuation of desiccators, vacuum apparatus, etc. Solvent recovery rates of up to 99% are possible if rotary
evaporators are used.

- Microprocessor-controlled
- Minimum solvent loss
- Considerable reductions in water costs
- Integrated air release valve
- Easy operation
- Space-saving stand-supported instrument
- Automatic setpoint correction
- Clearly organized membrane keyboard


Ident. No.2300000



IKA - HKD 06.2 Plunger

Double-walled plunger seat, for heating and cooling, which presses down the kneading material by means of spring-action. This considerably improves heat conduction in the measuring kneader. The central supply opening can be closed with a plunger. The HKD 06.2 plunger is not suitable for vacuum operation.

Ident. No.2936000



IKA - LT 6 control Circulation thermostat

Programmable thermostat for sophisticated tempering tasks up to 300 °C.

- Temperature manually adjustable or controllable via PC
- Automatic adaption of control parameters to all temperature control tasks via PID control
- Suitable for technical procedure experiments, e.g. with lab reactors or kneaders
- Direct temperature control in external vessels is possible
- 2 x 1 m Viton hose (Ø = 10 mm, max. temperature 180 °C), included with delivery

• Appliance type circulation thermostat
• Identification according to DIN 12876 FL
• Heat output 2000 W
• Operating temperature min. 60 °C
• Operating temperature max. 300 °C
• Working temperature max. 300 °C
• Working temperature min. (with water cooling) 20 °C
• Working temperature max. (with water cooling) 300 °C
• Temperature display yes
• Connection for ext. temperature sensor PT 100
• Heat control accuracy 0.01 ±K
• Adjustable safety circuit min. 20 °C
• Adjustable safety circuit max. 300 °C
• Pump pressure max. (0 liters discharge flow) 0.5 bar
• Pump pressure max. (0 bar back pressure) 18 l/min
• Width 230 mm
• Depth 365 mm
• Height 405 mm
• Weight 18 kg
• Permissible ambient temperature min. 5 °C
• Permissible ambient temperature max. 40 °C
• Permissible relative moisture 80 %
• Protection class according to DIN EN 60529 IP 21
• RS 232 interface yes
• Analog output yes
• Voltage 230 V
• Frequency 50/60 Hz

Ident. No.3036100



IKA - DTM 12 IKATRON® Digital temperature measuring instrument

For measuring temperatures between -200 °C up to +400 °C.

• LED display
• Analog output (1 °C = 1mV)
• Almemo interface for PC connection
• Sensor connection: Almemo
• pH electrode available as accessory
• Other measuring parameters, e.g. conductivity on request