Ovens - OP Series - LTE Scientific
|
PDF
|
| Print |
|
E-mail
|
Traditional quality and modern manufacturing techniques linked with LTE built-in reliability mean that the OP Series represents excellent value.
Flexibility
The OP Series is available in 5 sizes from 30 to 250 litres. Customers can choose between fan circulated or natural convection options, plus there is a choice of PID control systems to suit most applications as detailed below:
This Uni-program system offers single temperature selection and control at the push of a button. Following a mains power failure, the controller will automatically re-instate.
Our powerful new Multi-program controller will allow up to 8 multiple-step cycles to be stored in the memory at any one time. It also incorporates a selectable temperature ramping function, which allows controlled temperature rise and fall rates to be programmed into a cycle. At the end of a program sequence, the controller can be programmed to stop or repeat the sequence again. The repeat function can be programmed for a specified number of repeats or it can repeat continuously until interrupted. Following a mains power failure, 'M' models have 3 recovery options (cycle hold, start cycle from the beginning or re-start cycle from point of interruption).
RS232 or RS485 communication ports can be added to all 'M' models.
Performance
Fast heat-up times, almost undetectable overshoot and superb accuracy (see table below) make the OP Series a class-leading product.
All OP Series ovens incorporate a manual reset over-temperature cut-out, in line with IEC1010-2-010.
• Choice of PID temperature control systems
• Temperature range 40 to 250°C
• Digital display of set and actual temperatures (and programmed features on 'M' Models)
• Communication port options
• Class 2 Over-temperature protection
• Stainless steel radiused interiors
• Removable shelf runners
• Adjustable vent
• Choice of natural convection or fan circulated
• Sizes from 30 to 250 litres.
|
| Model & Cat No |
Cap
Ltr. |
Air
Circ. |
Int. Dims
HxWxDmm |
Ext. Dims
HxWxDmm |
Fluct.
± |
Spatial
Vari.
Empty ± |
Shelves/
Pos/
Mass, kg |
Power
Rating
Watts |
| U Models |
M Models |
| OP60-U |
OP60-M |
60 |
Nat. |
400x400x400 |
590x735x575 |
Fan
Circ.
0.2
Nat.
Con.
0.25
|
3.5 |
2/6/50 |
850 |
| OP60-UF |
OP60-MF |
Fan |
1.0 |
1000 |
| OP100-U |
OP100-M |
100 |
Nat. |
500x500x400 |
690x835x575 |
3.5 |
2/8/60 |
1000 |
| OP100-UF |
OP100-MF |
Fan |
1.5 |
1300 |
| OP150-U |
OP150-M |
150 |
Nat. |
600x500x500 |
790x835x675 |
3.5 |
2/10/80 |
1500 |
| OP150-UF |
OP150-MF |
Fan |
1.5 |
1600 |
| OP250-U |
OP250-M |
250 |
Nat. |
1000x500x500 |
1190x835x675 |
4.0 |
3/18/120 |
1950 |
| OP250-UF |
OP250-MF |
Fan |
2.0 |
2500 |
|
| OA001 |
0-24hr timer ('U' models only) |
| SH005 |
Shelf for 250-litre models |
| OA002 |
Independent printer |
| OA005 |
Access port, 18mm |
| OA006 |
Stacking kit (except 250 litre size) |
| OA007 |
RS232 Communication port |
| OA008 |
RS485 Communication port |
| SC001 |
Calibration certificate |
| SC002 |
12-point test certificate |
| SH002 |
Shelf for 60-litre models |
| SH003 |
Shelf for 100-litre models |
| SH004 |
Shelf for 150-litre models |
| SH005 |
Shelf for 250-litre models |
|
|
RSS Feed